1000W 2000 RPM General RS485 220V High Voltage Servo Driver and Motor Set DL4
1000W 2000 RPM General RS485 220V High Voltage Servo Driver and Motor Set DL4
Voltage: 220V
Protocol: RS485
Rated Power: 1000W
Rated Speed: 2000 RPM
Maximum Speed: 3000 RPM
Share
Couldn't load pickup availability
Core Advantages
Product
The company has a wide range of products to provide customers with high-quality, high performance and high stability products.
Quality Advantages
The company introduces Six Sigma management system to provide quality assurance for its products.
High Applicability
It has strong overload resistance and can withstand loads of three times the rated torque, which is especially suitable for applications with instantaneous load fluctuations and fast start-up requirements.
Technical Advantages
The company has a professional technical team, focusing on product development and leading innovation.
Service Advantages
With a professional technical team to provide customers with satisfactory solutions.
Shipment Advantage
We have integrated the most advantageous and strongest supply chain in the industry, with on-time delivery and short lead time.
Servo Drive Specifications
| Size | 173*47*162 |
| Maximum applicable motor capacity [kW] | 1.0 |
| Continuous output current [Arms] | 7.6 |
| Group maximum output current [Arms] | 23.0 |
| Single-phase input power supply | 1PH 200～240Vac、 -15%～+10% |
| Single-phase input Input current [Arms] | 16.4 |
| Three-phase input power supply | 3PH 200 ～240Vac、 -15%～+10% |
| Three-phase input input current [Arms] | 5.7 |
| Control power supply | 1PH 200～240Vac、 -15%～+10% |
| Power supply capacity [kVA] | 2.3 |
| Main circuit power loss [W] | 53.6 |
| Control loop power loss [W] | 22 |
| Built-in regenerative resistance Power loss [W] | 10 |
| Total energy loss [W] | 85.5 |
| Minimum allowable external resistance [Q] | 20 |
| Built-in regenerative resistor resistance value [Q] | 80 |
| Built-in regenerative resistor Capacity [W] | 20 |
| Overvoltage level | III |
| Protection class | CLASS I |
| EMC | EN 61800-3 second environment,C3 category |
| Low voltage command | EN61800-5-1 |
| Protection level | P20 |
| Environmental pollution level | PD2 |
| Altitude | Below 1000m, derated use above 1000m |
| Operating ambient temperature | 0~55°C(ambient temperature above 45°C,10% derating for every 5°C increase) |
| Storage temperature | -20 ～ 85C |
| Ambient humidity | Less than 90%RH (no condensation) |
| Storage humidity | Less than 90%RH (no condensation) |
| Vibration resistance | 4.9m/s² |
| Impact strength | 19.6m/s² |
| *For single-phase input, output current derates to 8.4A. | |
Servo Motor Specifications
| Dimension | 130 |
| Motor model | TH130100-MBANK5 |
| Rated power (W) | 1000 |
| Number of poles | 5 |
| Rated voltage (V) | 220 |
| Rated torque (N.m) | 4.8 |
| Instantaneous maximum torque(N.m) | 17 |
| Rated speed (rpm) | 2000 |
| Instantaneous maximum speed (rpm) | 3000 |
| Rated current (A) | 6 |
| Instantaneous maximum current (A) | 18 |
| Moment of inertia (kg.m²×10⁴) | 7.2 (8.7) |
| Brake torque (Nm) | >10 |
| Brake Power (W) | 23 |
| Brake operating voltage (V) | 24V±5% |
| Brake operating current (A) | 1 |
| Encoder | Incremental / absolute |
| Insulation class | F(155C°) |
| Insulation withstand voltage | AC1500V 60S |
| Insulation resistance | The DC 500V is larger than 20MQ DC 500V大于20MQ |
| Protection level | Fully enclosed self-cooling (P65 except output shaft extension and connector) |
| Operating ambient temperature | -20C°~40C(non-freezing) |
| Ambient humidity | 20~80%RH(no condensation) |
| Installation mode | Flange mounting IMB5 |
| Use site, altitude, environment | Indoor, less than 1000m, no corrosive, flammable gas, dust and oil places |
| Direction of Rotation | CCW(forward rotation instruction rotates counterclockwise from the load side) |
| Weight (kg) | 4.8 (6.4) |
| The motor parameter data in the table is for reference only, and the data in the motor specification shall prevail. | |
